Graphitegraphite

How to Draw a Cone and Shade It in Pencil

Draw a cone with a sharp point and curved base, then shade the side away from the light so the shading narrows toward the tip, plus its cast shadow.

By Ayoub Farid · · 2 min read

The cone is the last of the four basic forms. Graphite's daily sketch: draw a cone with a sharp point and a curved base, shade the right side, and add its shadow on the table.

Daily sketch reference: a shaded cone
Shading narrows toward the point

Step 1: Center line and point

Draw a vertical line and mark the tip at the top.

Step 2: The base

Draw an ellipse at the bottom centered on the line. Curve the base; don't draw it flat. Erase the hidden back half later.

Step 3: The sides

Connect the tip to the two ends of the ellipse with straight lines.

Step 4: Shade

Light from the top left:

  • The lit side is on the left, the shadow on the right.
  • Like a cylinder, use bands, but they converge toward the tip.
  • Your shading should narrow toward the point.
  • The darkest band sits a little in from the right edge.

Step 5: Cast shadow

Points away from the light, to the lower right. A cone's shadow is a triangle-like shape coming from the base, darkest at the base.

Common mistakes

MistakeFix
Flat baseCurve it as an ellipse
Shading in horizontal bandsBands run from base to tip
Even shadingLight band left, core shadow right

Values at a glance

AreaValue
Light band (left)Light
MiddleMedium
Core shadow band (right)Dark
Right edgeSlightly lighter
Cast shadowDark at the base

A 10-minute practice plan

  1. 2 min: center line, tip and base ellipse.
  2. 2 min: sides, then erase the back half of the base.
  3. 4 min: shading bands from base to tip.
  4. 2 min: cast shadow.

Variations

  • A cone lying on its side: the base becomes a tilted ellipse facing you; the shadow is a long triangle.
  • A truncated cone (a plant pot or lampshade): cut the tip off with a second, smaller ellipse.
  • An ice cream cone: add a cross-hatched texture that follows the cone's curve, plus a sphere of ice cream on top.

Troubleshooting

  • The tip looks blunt: sharpen the point and keep the sides straight.
  • The cone looks flat: the bands don't converge. Each band must narrow toward the tip.

Frequently asked questions

What real objects are cones?

Carrots, party hats, ice cream cones, the sharpened tip of a pencil.

How do I draw an upside-down cone?

Same steps, with the ellipse at the top. The top ellipse is flatter if near eye level.

Which is harder, cone or cylinder?

Similar. The cone's converging bands take a bit more care.

Related: basic shapes, how to draw a cylinder.

Keep reading